The main characteristics of the motherboard are as follows:
1. Integrated with Intel ® Celeron N100 0.8GHz quad core processor, compatible with Intel ® Alder Lake full range of CPUs;
2.1 * SODIMM slot, single channel 3200MHz DDR4 memory, supports up to 16GB;
3. Display supports DP, HDMI, HDMI2 (optional), up to three displays;
4. Can support 4 Intel I225V or I226 2.5 Gigabit networks;
5. Supports 1 Mini PCIe (WIFI/4G) and 1 M.2 Key-M 2280/2242 PCIe/SATA SSD;
6. Supports 2 USB 3.1 interfaces and 6 USB 2.0 interfaces, with 1 Type-C interface (USB 2.0);
7. Built in 2 RS232 serial ports, optional support for 1 RS485;
8. No fan cooling, can be made into a closed whole machine, achieving dust and moisture prevention;
9. Supports wide temperature operation from -10 to 60 degrees Celsius;
10. Supports AT and ATX mode switching, powered by 12V DC power supply.
Item | Description |
Processor |
Integrated Intel ® Celeron N100 0.8GHz quad core processor, TDP 6W Compatible with Intel ® Alder Lake full range of CPUs. |
RAM | 1 * SODIMM slot, single channel 3200MHz DDR4 memory, supports up to 16GB |
Display | Integrated Intel ® UHD Graphics Supercore Graphics Card |
|
1 * HDMI1 interface (4K 60Hz), 1 * DP interface (4K 60Hz),Supports HDMI1 and DP synchronous/asynchronous display. |
Network | 4 * Intel i225 or i226 2.5G network card, supporting network wake-up/PXE |
Storage | 1* 7pin SATA3.0 ,Hard disk interface, with a transfer rate of up to 6Gbps |
| 1* M.2 Key-M 2280/2242 ,Adaptive PCIE/SATA SSD slots |
Expansion Slots | 1* Mini-PCIe,Slot, supports 4G modules and WIFI (WIFI V1.2 version supports) |
Back I/O | 4* intel I225V or i226 2.5G |
| 2* USB2.0 |
| 1* HDMI+DP |
| 1* 12V DC |
Front I/O | 2* USB 3.1 |
| 2* USB 2.0 |
| 2* DB9 RS232,Serial port (default to two RS232 ports, COM1 can support RS485 by adjusting hardware) |
| 1* Console,Interface (optional, same signal as COM2 of the previous IO DB9 interface) |
| 1* TYPE-C USB2.0,Interface (optional support, and one of the two USB ports in the F-USB1 pin) |
| 1* Hard disk indicator light |
| 1* Incoming call activation dial switch (optional support) |
| 1* With power light switch button |
Inside I/O | 1* USB 2.0 2*5pin,Interface (Two USB signals on the F-USB1 pin are shared with the 4G module and TypeC USB signal. If TypeC is not loaded, there is only one USB 2.0 signal on the pin by default) |
| 1* TPM2.0, 2*6Pin |
| 1* Hard disk power interface |
| 1* 4pin Small white socket power interface |
| 1* 2*5Pin GPIO,Pin insertion |
| 1* Front panel switch button and indicator light interface, 2*5Pin |
Fan | Back mounted CPU without fan cooling design, reserved 1 * 4 pin CPU fan interface |
GPIO | Supports 4 input/output GPIOs |
BIOS | 128Mb Flash ROM |
Watchdog | Support hardware reset function (256 levels, 0-255 seconds) |
System | Windows 10/Windows 11/Linux |
Power | DC 12V |
Working temperture | -10℃~60℃ |
Storage temperture | -20℃~70℃ |
Working humidity | 5%-95% ,Relative humidity, non condensing |
Size | 120mm x 120mm |